Posts Tagged ‘Environmental Exposures’

Are Granite Countertop Companies Safe From Pollution Exposures?

Thursday, December 9th, 2010

As concerns grow about radon exposure and dust from granite countertop installation, it is important to focus on the need for environmental coverage for this class of contractors.

In the last few years, granite has become a fashionable and trendy building material due to its natural beauty, shine, durability, and scratch/heat resistance. Granite is an igneous stone, mainly formed through volcanic material such as magma. It is primarily made of quartz, feldspar, and potassium, and is an extremely hard material that is easier to maintain than marble. Installing granite countertops in homes and offices has created a huge amount of business for granite countertop contractors—the service and installation has become a very lucrative component of the building and remodeling industry. With the prevalence of granite in homes and offices today, there has been some recent concern over the pollution exposures for people working with, and living around, this popular stone.

Measuring and cutting granite takes a great deal of precision and is almost always outsourced to contractors specializing in granite countertop installation. These professionals will take very exact measurements for the countertops and create a template, which is used to cut the stone. As you may imagine, the dust associated with cutting granite is composed of very fine particles that can be extremely hazardous if inhaled into the lungs. When exposed to even low levels of granite dust over a long period of time, there is a potential for different types of serious respiratory illnesses.  In addition to countertop contractors having this exposure, many companies will let customers come to their facilities to choose their own slabs of granite for their countertops. Inviting people onto the facility presents an additional pollution liability risk for these companies, since there is usually a large amount of dust on the company premises.

Another exposure concern with granite is the potential for it to emit radon gas into the air. “Radon is a naturally occurring radioactive gas found in soils, rock, and water. It is the largest source of exposure to naturally occurring radiation…The National Academy of Sciences (NAS) concluded after an exhaustive review that radon in indoor air is the second leading cause of lung cancer in the U.S. after cigarette smoking,” as explained on the Environmental Protection Agency website. Although allegations that granite countertops may emit toxic levels of radon are still in question, many government officials suggest that homes and offices test the granite for this exposure.

Contractors providing granite products and installation need to be aware of these risks and take the necessary precautions in order to prevent these health hazards and be protected from environmental insurance claims. A pollution policy would help to reduce the potential for an out-of-pocket claim, and would work to further secure the future success and welfare of companies specializing in granite and their employees.

Post to Twitter Post to Digg Post to StumbleUpon

BP Oil Spill Disaster Creates Opportunity for Environmental Contractors’ Market

Thursday, August 12th, 2010

Article written by Beacon Hill’s Assistant Vice President, Michael Tighe. Featured in the August 2010 issue of Insurance Journal.

No matter which television channel or website you turn to, the Gulf oil spill has dominated the news. This is an environmental crisis that will affect the region’s economic capabilities and natural resources for years, if not decades, to come. Between 2 to 4 million barrels of oil have spilled into the gulf, compared to 257 thousand barrels during the Exxon Valdez event . The fishing and tourism industry, which was depressed before the tragedy, is now virtually non-existent. Gulf coast economies from Texas, Louisiana, Mississippi, Alabama, and Florida have all been affected, and scientists are predicting that the Gulf current may carry contaminants along the Florida Keys and up the east coast.

This disaster creates a tremendous opportunity for remediation contractors and consultants. Environmental contractors from across the country have flocked to the Gulf in search of clean-up contracts. Over twenty-four thousand people are working as part of the response to the April 20th accident and its aftermath. The spill has created a wide array of jobs from remediation/spill response contractors to ship boat captains to day laborers. Many unemployed fishermen, construction workers, and general laborers are receiving OSHA HAZOPER training and aiding in the clean up. “We have received numerous phone calls about potential start-up businesses or companies opening up new divisions in this area,” said Michael Tighe, Assistant Vice President at Beacon Hill Associates, a wholesale insurance broker and program administrator, specializing in the placement of environmental insurance.

Remediation Methods Used

More than 46,000 people – and nearly 7,000 boats – are now employed in the response1. While fishing business was struggling before the disaster, fishermen are now making $1,200 – $3,000 a day laying floating booms that contain oil once it rises to the surface . Where the oil collection is greatest they often create a “burning box”, which is a controlled burn over the water. In the marshes and other wetlands, contractors are mopping the oily sheen with absorbent oil pads, wiping each blade of grass, which can be time-consuming labor. In open water, boats are equipped with oil/water separators that skim surface water and can extract two thousand barrels of oil per day . Thousands of workers comb the beach using shovels or shifting machines collecting tarballs on the sand. Unfortunately, oil can be buried underneath the sand, between tides, which will require sand incineration or other deeper cleaning methods.

Potential Coverage Issues

Below are some coverage issues agents should consider when obtaining Pollution insurance for their clients.

Action over – not all liability policies provide action over coverage. An employee of the contractor may potentially sue the project owner directly for liabilities suffered during the work. This type of claim occurs more frequently with remediation contractors.

Time element triggers – some policies limit pollution to a sudden/accidental trigger only whereby the pollution occurrence and claim filing must occur within a limited period of time (usually 72 hours).  A policy that includes gradual pollution is more effective for emergency response contractors.

Coverage territory – The coverage territory within the policy may not include international waters.

Designated operations – Many Contractor Pollution policies provide coverage only for operations listed on the policy. If the contractor’s work expands beyond what is listed, no coverage may be afforded.

Watercraft exclusions – there are specific limitations under a package General Liability and Pollution policy pertaining to the use and length of boats allowed.

Subcontracted work and construction management exclusions – if the remediation contractor is using subcontractors, liability may extend only if the sub meets specific qualifications and insurance requirements. Also, the supervision of subcontractors may not be covered unless a Professional Liability policy is in force.

Transportation and disposal issues – if the contractor is responsible for the transportation and disposal of waste, there may be no coverage afforded under a basic Contractors Pollution policy, should an incident occur beyond the boundaries of a job site. Limited coverage is attainable in the marketplace with proper information.

Product exposures – specific Product Pollution policies are available for manufacturers and distributors of chemical dispersants, separators, containment booms, etc. used in the spill response. Coverage can be written stand alone or in conjunction with a commercial General Liability policy.

Pollution definitions – vary greatly. Some do not include “waste” in their definition of a pollutant. If waste/refuse is not included in the definition, it may lead to gaps in completed operation and disposal coverage.

Property – hurricane and wind concerns – In addition to contracting pollution exposures there has also been interest in environmental coverages from property owners.  In the midst of hurricane season, commercial property owners are becoming increasingly concerned that high winds may carry petro contaminants onto their premises. Interested parties are not only coastal, but miles away from shore. If the specified cause of loss is not the windstorm but rupture of the underwater well, many agents have found little or no pollution clean up coverage for real or personal property. The next wave of environmental contractors to the Gulf may be restoration contractors equipped to extract water and oil in and on buildings.

Due to the influx of submissions that environmental markets are receiving, they are starting to quantify the number insureds involved in the clean up effort. Additional supplemental applications may be needed to gauge the amount of on and off shore activities, as well as the amount of work subcontracted. Some carriers are limiting their exposure to coastal premises/site pollution policies, possibly offering coverage with higher retentions or without first party clean up triggers.

While agencies scramble to secure pollution coverage for their clients being affected by the oil spill in the Gulf, they should also get a clear picture of the prospective insured’s scope of operations, contractual responsibilities, and qualifications. This is crucial in order to offer effective insurance solutions, as no two policies are the same in the environmental insurance marketplace.

Post to Twitter Post to Digg Post to StumbleUpon

Addressing Pollution Exposures for Mechanical Contractors

Thursday, June 10th, 2010

HVAC and Mechanical Contractors are faced with a unique challenge in today’s insurance market. While they are traditional contracting risks, they have become the focus of growing pollution and mold related claims over the last several years. Exacerbating the problem is the trend of holding these contractors to a higher standard than many other trades, in effect giving them a “professional” liability exposure. These firms are now being expected to not only install the equipment properly, but to consult on its design and identify potential problems with another’s design as well. While flattering, it creates a coverage issue for many of these risks.  HVAC and Mechanical Contractors have two primary areas of concern: (1) contracting services creating environmental problems and (2) growing professional exposures.

Contracting services can create environmental problems in the following ways:

Installation leads to hazardous indoor air quality.
One of the biggest environmental concerns faced by Mechanical/HVAC professionals is the allegation that their work has led to an unhealthy indoor environment. This can manifest itself in many ways, including odors, ill employees, or staining and damage to walls and fixtures. When these allegations lead to Bodily Injury, Property Damage, or Business Interruption, the claims can become sizeable. If the basis of the claims is the toxic nature of the contaminant, pollution exclusions are often cited.

Installation leads directly to mold growth.
Mold growth is generally caused where moisture, a food source, and an acceptably warm environment meet. One of the unfortunate drawbacks to installation problems with HVAC systems can often be excessive moisture, either in the form of condensation or actual leaks. This moisture, matched with wood or wall board and warmth, leads to mold. Most mold claims are excluded from CGL policies.

Job site pollution caused by the contractor disturbing existing conditions.
Many claims faced by Mechanical/HVAC contractors stem from disturbing asbestos, lead, or existing mold within the structure while work is being performed. This can take the form of asbestos wrap on piping, lead paint on windows and doors, or mold growth that existed prior to the work. Making these conditions worse by spreading the contamination can lead to significant liability on the part of the contractor.

Job site pollution caused by contaminants the contractor brings to the site.
Many Mechanical/HVAC contractors use equipment powered by generators, requiring fueling. They also regularly use solvents, acids, glues, and other toxic substances at the job. The release of these materials, or their improper disposal, can lead to pollution claims.

The operations of subcontractors for which the contractor is responsible.
When Mechanical/HVAC contractors hire subcontractors to do work such as electrical, plumbing, or remodeling and construction, they run the risk of being held responsible for pollution conditions stemming from the subcontractors’ work. Obviously the contractor will require the sub to carry his own insurance, and name the contractor as an additional Insured. If the subcontractor causes a pollution condition, and his environmental coverage is inadequate, the Mechanical/HVAC contractor may have to defend himself against claims relating to work for which they were responsible due to hiring of the sub.

HVAC firms have growing professional exposures:

Actual design work performed.
Many firms provide true design services as part of their corporate profiles. This can range from doing all of the design work for the project, doing some design work relative to an aspect of the HVAC system, or simply having a perceived responsibility to comment on design aspects they know to be poorly developed.  The last element is the most difficult to control and manage for HVAC firms.

Job site modifications made.
HVAC contractors are often presented with installations that do not work exactly as planned. In these situations, contractors will often tweak the specs while at the jobsite to make the system work. Malfunctions arising from these changes create a direct professional responsibility for the contractor.

Supervision of subcontractors.
Proper selection and supervision of subcontractors is a professional exposure most contractors share that is generally excluded from CGL and basic CPL policies. For contractors that may need to outsource certain parts of a job, the exposure can be significant.

It is important to remember that while addressing Contractors Pollution and Professional Liability are important, the key for this class of business is to address Mold at the same time. There are very few products that combine all three elements, so knowing how to get the appropriate coverage for your insureds and covering all bases is crucial to keeping them protected.

Post to Twitter Post to Digg Post to StumbleUpon